Bay BayStack 400-ST1 Instrukcja Obsługi Pobierz pdf (Strona 24)

b. Connect the other end of the cascade cable to

the cascade A In connector on the unit just

below the base unit (unit 2), or just above the

base unit if cascading up the stack.

c. Continue attaching the cascade cables until

the last unit is configured.

A maximum of eight units can be configured per

stack.

d. At the last unit in the stack, connect one end of

a cascade max-return cable to the Cascade A

Out connector. Connect the other end of the

cascade max-return cable to the cascade A In

connector on the base unit.

When stacking 3 or more units, the (optional) 1

meter (39.27 inch) cascade max-return cable is

required (Bay Networks Part Number 303979-A).

8. Be sure all cable connections to the cascade

connectors are secured firmly by the thumb screws

on the cascade cable plugs.

9. Proceed to “

Connecting Power” on page 23.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

Brak uwag

Bay BayStack 400-ST1 Instrukcja Obsługi Strona 24