Bay BayStack 400-ST1 Instrukcja Obsługi Pobierz pdf (Strona 20)

Figure 8. Installing a 400-ST1 Cascade Module

4. Press the module firmly into the chassis slot. Be

sure that the module is fully seated into the mating

connector.

5. Secure the module in the chassis by tightening the

thumb screws on the module front panel.

6. Repeat Steps 1 to 5 for each switch that is to be

configured with the 400-ST1 Cascade Module.

7. Proceed to the next section “

Installing and

Connecting Multiple Switches” on page 19.

Caution: Be sure that the module slides in on the

guides provided. Failure to align the guides could

result in bent and broken pins

Cascade A Out

Cascade A In

Unit Select

ase

BS0037A

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Brak uwag

Bay BayStack 400-ST1 Instrukcja Obsługi Strona 20